“TIRES WILL SINK INTO LOOSER MATERIALS, ADJUST OTHER COMPONENTS ACCORDINGLY”
Call Toll Free:
877-788-7253
Email:
17
All of the components on the TR3-E are adjustable using the compatible pins. By removing these pins, adjust the components up
and down within their respective pockets. The Profile Blade (1), Leveling Blade (2), Scarifiers (3), Leveling Blade (4) and Profile
Blades (5) all have multiple adjustment positions for fine tuned usage.
Finish Rake/Comb
Breaks up clumps of material and leaves a beautiful
signature finish. Finish Rakes are made up of smaller
sections to decrease cost when needing to replace a worn/
damaged tooth. Instead of having to replace the entire rake,
individual sections can be ordered.
Grooming Rods
The grooming rods are used on the Equine and Trevor
Brazile units and are for daily arena grooming after the
original breakup of compaction by the scarifiers. The
grooming rods can be adjusted by ½” increments to a depth
of up to 6”. As the grooming rods wear, they can be adjusted
downward for extended life.
The Grooming rods are a secondary loosening component
that follows the leveling blade and adds air into the footing
promoting more cushion. Grooming rods also customize
footing performance; run the rods above the Profile Blades
for disciplines such as Reining and Dressage for a smooth
base and slightly below the Profile Blades for barrel
racing and Jumping to add texture and grip to the footing.
See pages 21-23 for Grooming Rods setup depth guide.
NOTE:
Grooming rods are NOT recommended for gravel
work.
Components (cont'd)
FOOTING
BASE
SUBSURFACE
Profile
Blade
Leveling
Blade
Scarifying
Teeth
Grooming
Rods
Finish
Rake
1
2
3
4
5
