manualshive.com logo in svg

ABI Attachments Arena Pro, Owner'S Manual, Page: 12 / 21

Share
Download
ABI Attachments Arena Pro Owner'S Manual Download Page 12

Visit: 

www.abisupport.com

Call Toll Free: 

877-788-7253

Email: 

[email protected]

22

23

Profile Blade

Profile Blades should be replaced when the edge of the blade has worn down to the weld on the angled shanks.

Replacement Parts (cont'd)

Options

ITEM

PART #

DESCRIPTION

1

10-20128

5/16 SAE WASHER ZNC

2

10-20164

HX HD BOLT:1/2-13 1.5":ZINC GR5

3

10-20175

HX HD BOLT:1/4-20 1":ZINC GR5

4

10-20194

FLT WSHR:1/2 SAE: CL ZINC

5

10-20196

FLT WSHR:1/4 SAE:CL ZINC

6

10-20202

NYLOCK NUT:5/16-18:ZINC GR 5

7

10-20208

NYLOCK NUT:1/4-20:ZINC GR 5

8

10-20230

HITCH PIN:1/2" X 5":ZINC

9

10-20232

LYNCH PIN:1/4"X1.25":ZINC

10

10-20325

ASLN NUT:1/2-13:ZINC GR 5

11

10-20368

HX HD BOLT:5/16-18 2.50":ZINC GR5

12

10-40300

WLDMT: RAIL BLADE RIGHT: RASCAL

13

10-40304

WLDMT: RAIL BLADE ARM X BRACE RIGHT: RASCAL

14

10-60069

WHEEL: RAIL BLADE: TR3E RASCAL

11

14

12

9

8

7

10

13

2

5

5

1

1

4

3

6

4

10-90261 KIT: RAIL BLADE RIGHT

The rail blade attaches to the frame with a large 

pin (Item 8). The shovel cuts into the built up 

material along arena walls and rails and pulls it 

away, saving the user time and effort.

To use the rail blade, pin the scarifiers/profile 

blades out of play. Use the toplink to adjust the 

rail blade angle so it is level with the footing. 

The 

rail blade is meant to be used with only the 

finish rake in play.

 This allows it to pull material 

in from the edge and then be spread out by the 

rake.

Summary of Contents for Arena Pro






















Reviews:

No comments