1. On/Off (Power)Button
2. Up Button
3. Mode M
4. Temperature
Down Button
Operating Instructions
Another useful application for the remote control is if the dehumidifier is in an area that's difficult to access on
a regular basis. For instance, if your dehumidifier is installed in your crawl space, the remote could be mounted
in your living space or garage.This provides you with an easy way to monitor the dehumidifier.
Press the onloff button and the machine will start running (two
beeps).Press the button again to turn the machine off.
Use the Up and Down arrow buttons to adjust the humidity level.
Use the Mode button to switch between dehumidification and
a ducted application.
Press the temperature button to display the current temperature on the screen.Press the button again to turn of the display.
5. Continuous c
Press this button to switch the unit into continuous mode. cont. will appear on the display to indicate continuous mode.
Press the power key to turn the machine on.
6. Drain Pump P
1. Start the machine
Use the up and down arrow keys to adjust your desired setpoint (typically 50-55%).
2. Adjust Settings
Press the power key again and the machine will stop. Note the fan will continue to operate
for 1 minute after the unit has shut off. NOTE: Do not disconnect the power cord to force the
machine to stop.Always use the power button.
3. Stop the machine
The Guardian SNS90 has both automatic and manual draining. During normal operation, the
Guardian SNS90 will automatically drain as required. lf you would like to store or move the
machine, you may press the drain button to drain the water from the pump reservoir. The
drain will operate for 15 seconds each time the button is pushed. lt may be necessary
to push the drain button more than once to completely empty the reservoir.
4. Water Drainage
Use this button if the unit will not be in use for an extended period of time.Pressing the drain pump button will remove
water from the pump reservoir, so the unit can be safely moved or stored.
NOTE: The symbols mentioned above will only appear when the dehumidifier is powered on.
The
The
on the remote control is being utilized.
the dehumidier is being utilized.
symbol on the display board indicates the sensor
symbol on the display board indicates the sensor on
6
