How do I use the LiftMUp to help me get out of bed?
Press the
↑
button to raise the backrest continuously and start moving your legs to the edge of
the bed and toward the floor. Use the backrest for full support while slowly rotating your torso
to transition to a sitting position.
How do I transport the LiftMeUp?
The LiftMeUp recliner is portable and was designed to be easily transported.
Before moving the recliner:
•
Remove the fitted sheet from around the frame of the LiftMeUp so you can move the foam
topper independently from the recliner,
•
Using the hand control, always bring the backrest down to its lowest position,
•
Disconnect the electrical plug from the wall outlet and secure all electric cords so they do not
constitute a tripping hazard when carrying the recliner,
•
Always carry the LiftMeUp using the handle bar.
•
Avoid any impact and handle gently so the motor and the frame do not get damaged. Move
your LiftMeUp to its desired location and reinstall following the “Installation” instructions in
the User’s Manual.
To transport or ship the LiftMeUp recliner, always:
• Use the box it came in,
• Protect the LiftMeUp by folding the foam topper around the motor area and packing
carefully, paying special attention to the wires so they do not get trapped/pulled which could
permanently damage the connections.
What are the important safeguards that I should know about?
REFER TO THE USER’S MANUAL AND READ IT ENTIRELY BEFORE INSTALLING AND OPERATING
YOUR BED RECLINER.
A link to the User’s Manual is provided at the bottom of the Page “Our Products” so please
check our website.
How do I care for the LiftMeUp?
ALWAYS DISCONNECT THE ELECTRICAL PLUG FROM THE WALL OUTLET BEFORE MOVING AND
CLEANING YOUR LIFTMEUP RELCINER.
DO NOT SUBMERGE ANY PARTS OF THE LIFTMEUP RECLINER, INCLUDING HANDSET AND
POWER SUPPLY, IN WATER OR LIQUIDS.
DO NOT USE ALCOHOL OR SOLVENTS ON ANY PARTS OF THE LIFTMEUP RECLINER
