User Operations Guide—Mira Instant Replay Server
244
Copyright ©2014, Abekas Incorporated
Revised: 5 September 2014
Open Live Replay Event on Control Panel
1.
RIGHT-click
mouse on
instant replay
Event folder
that was just created.
A pop-up menu dialog appears.
2.
Click “
Open on Control Panel
” item.
The “
Checking control panel firmware
” dialog
window appears, which verifies the firmware
inside
Mira Control Panel
is compatible with
Mira Explorer
software.
This dialog closes automatically after a few
seconds if
Mira Control Panel
firmware is found
to be compatible.
If
Mira Control Panel
firmware is not
compatible, then
Mira Explorer
will automatically
update firmware inside
Mira Control Panel
so
that it is compatible; a dialog to that effect will
appear automatically, change the firmware, and
then automatically close.
After
Mira Control Panel
firmware is verified,
Mira Instant Replay
user interface appears, as
shown here.
3.
IMPORTANT!
Click mouse cursor
anywhere
on user interface screen, then
move cursor off-screen and move mouse
device out of your way.
The mouse won’t be needed while using
the Mira Instant Replay Control Surface.
1
2
Continued on next page…
Summary of Contents for Mira
Page 382: ......