12
13
The assembly process is now complete. Adjust LEVELERS located under front and rear
feet as needed. To move machine, grasp machine from the rear and tilt forward to
engage wheels at front of unit.
STEP 6:
STEP 4:
Attach ARMREST CONSOLE plate using
4 hex nut screws, and attach Hand Grip
to Arm Rest Console.
Use hex key tool to firmly tighten all
screws.
Be careful not to cross thread or
overtighten screws.
Now you may safely cut the strap that
secures the SEAT. (The strap with the
Caution label that says “Do Not Cut”).
STEP 5:
Adjustable
Hand Grip
Insert Adjustable
Hand Grip into slot
as shown and attach
with screw in back
and secure with
pop pin in front.
AbC_CS3000_MAN_V2_100519.indd 13-14
5/28/10 2:36 PM
