ENGLISH
Important:
Read the instructions carefully before use and Keep it for future reference or for subsequent possessors.
•
Warnings
Read and have each operator read this information note carefully, use, maintenance, repair and disposal of the tool.
In any case, always check and comply with national safety regulations.
Do not remove or damage labels, especially those required by law.
•
Technical data
Light Source:
high power COB LED Main light (Front)
high power:
COB LED Main light (Back)
high power:
SMD LED Top light
Lumen Power
ca. 200 lm Main light (Front) full power mode
ca. 100 lm Main light (Front) ECO mode
ca. 180 lm Main light (Back) full power mode
ca. 80 lm Top light
Operating time
ca. 2h Main light (Front) full power mode
ca. 4h Main light (Front) ECO mode
ca. 2h Main light (Back) full power mode
ca. 3h Top light
Battery Specification Li-Ion 3.7 V, 700 mAh
Charging Time
ca. 2.5 h
Charging Input
DC 5V 1A
Degree of protection
IP54, IK 07
Operating temperature -10 °C to +40 °C
Weight
81 g
Dimensions
30x17x307 mm
•
Warning
Do not open the device.
Do not look directly into the light emitting lamp - Risk of eye injuries!
Do not operate in direct sun light or extreme temperature conditions.
Operating temperature, -10°C to +40°C.
Keep away from children! Children should be supervised in order to ensure that they do not play with the device!
•
Operating & charging procedure
- Press the Switch first time, top light switch on.
- Press the Switch second time, main light (Front) switch to ECO mode.
- Press the Switch third time, main light (Front) switch to full power mode.
- Press the Switch fourth time, main light (Back) switch to full power mode.
- Press the Switch fifth time, whole light switch off.
