ENGLISH
Important:
before use, read these instructions carefully and keep them for further information.
•
Warnings
Read instructions before use.
Work only in a dry area free from flammable materials.
Keep away from children.
Never touch the tip of the hot soldering iron or attempt to remove solder from the tip with your hands.
Ensure that switch is in the OFF position when the iron is not in use.
Tip remains hot after use for several minutes. Ensure tip is cool before storing the soldering iron.
Do not disassemble or modify the battery. The battery contains safety and protection devices which if damaged, may cause the battery to
generate heat, rupture or ignite.
If your soldering iron malfunctions do not try to repair. Contact your dealer for tecnical support.
•
Technical data
Lenght 260 mm (with cap)
Width 29 mm
Height 40 mm
Weight 130 g approximately
Battery capacity 2900 mAH
Soldering tip temperature: 50 – 500 °C
Heat up time 8 seconds approximately
Operating time 30-40 minutes
• User guide
Thoroughly clean and remove oil and other contaminants from parts to be soldered
Use only small amounts of solder. Excess solder can cause a short circuit
1. Slide ON/OFF Switch to ON position
2. Press and hold the Power Button. The LED light will illuminate indicating the iron is on.
3. Allow tip to reach working temperature (about 8 seconds)
4. Apply a small amount of solder to tapered surface of tip.
5. Tin wires by heating the bare wire and allowing a small amount of solder to flow onto the tip of the wire.
6. Touch the tapered surface of the tip (not the point) to the joint to be soldered. Heat joint and allow heat from joint to melt solder.
