abc GE-8 Starguide III, Quick Start Manual

Page: 5 / 9

sg3_QS_GE8 03/22/01 Page 5 of 5
NETCUE/DATA CARD
INSTALLATION GUIDE
The NCC contains 16 Form “A” relays to present dry contact closures to the user It also
contains a serial output of ABC DATA. Follow the tables below to wire the NetCue
contact closures and ABC DATA serial output properly:
NETCUES
PIN Function PIN Function
1 RLY0A 20 RLY0B
2 RLY1A 21 RLY1B
3 RLY2A 22 RLY2B
4 RLY3A 23 RLY3B
5 CHASSIS
GND 24 CHASSIS
GND
6 RLY4A 25 RLY4B
7 RLY5A 26 RLY5B
8 RLY6A 27 RLY6B
9 RLY7A 28 RLY7B
10 CHASSIS
GND 29 RLY8B
11 RLY8A 30 RLY9B
12 RLY9A 31 RLY10B
13 RLY10A 32 RLY11B
14 RLY11A 33 NETQ RXD
15 NETQ TXD 34 RLY12B
16 RLY12A 35 RLY13B
17 RLY13A 36 RLY14B
18 RLY14A 37 RLY15B
19 RLY15A
37 PIN RELAY CONNECTOR
IMPORTANT: DO NOT connect your automation device to PINS 5, 10, 15, 24
or 33. PINS 5, 10 and 24 are receiver chassis grounds. PINS 15 and 33 are
serial connections for the NetCue data stream to use with existing ABC
NetCue II boxes. Your relays will not function properly if you wire to these
pins.
PRINTER OR WIRE CAPTURE
RJ-45 SERIAL CONNECTOR
PIN FUNCTION PIN FUNCTION
1 RTS 5 GND
2 6 RXD
3 TXD 7
4 8 CTS
Serial output : 9600 baud, 8 Data Bits, No Parity, 1 stop-Bit (9600,8,N,1)