Step 1 – Assemble the in/out head
1. Please read entire manual
before starting the installation.
Please Verify you have all parts.
2. Lube O-ring located on the
bottom of the in/out head.
3. Verify that the basket is secure
-
ly fastened to the in/out head
and connect with distributor tube
located in the carbon tank. Make
sure that the tube is inserted into
the basket. To secure in place
twist clockwise till tight.
Step 2 – Attach bypass valve
1. Lube O-rings on the bypass
valve and attach bypass valve to
the in/out head, fitting the female
ends with the easy tighten nuts
onto the female ends of the in/
out head. Hand tighten the nuts to
seal the connection between the
bypass valve and the in/out head.
Step 3 – Rinse
1. Find a location outside which you can reach with a garden
hose. You will be running water so a downward sloped drive
-
way would be a great location.
2. Place the hose in either one of the openings located on the
‘In & Out’ head. You will be rinsing from both sides before
completing this process.
Valve to Carbon Tank
