![background image](http://html1.mh-extra.com/html/abc/braun-nl501-series/braun-nl501-series_troubleshooting-manual_3328680013.webp)
Remove the cover at the bottom of the compartment to access the
pump motor and diagnostic board. Verify power on the large red
cable, if none refer to the proper wiring schematic for location of
fuse Z05. The see through plastic reservoir allows you to verify
proper oil level.
Verify the 30 and 2 amp fuses are not blown.
The Main ground wire is black and is located in the
upper left hand corner of the lower compartment.
Summary of Contents for Braun NL501 Series
