5
Safety Information
SET UP YOUR FURNITURE PROPERLY
□
Ensure that all parts are assembled properly and fully tightened as per
the instructions.
EXAMINE YOUR FURNITURE
□
Examine occasionally to ensure that there are no loose parts. If loose
parts are found, they must be retightened fully before additional use.
INSTALLATION MEETS REQUIREMENT
□
The installation must conform with local codes, or in the absence of local
codes with the National Fuel Gas Code
，
ANSI Z223.1 • NFPA 54; National
Fuel Gas Code; Natural Gas and Propane Installation Code, CSA B149.1; or
Propane Storage and Handling Code, CSA B149.2, as applicable;
INSTRUCTION TO INSPECT THE BURNER
□
The burner must be replaced prior to the appliance being put into operation
if it is evident that burner is damaged. The replacement burner shall be that
specified by the manufacturer.
WHAT IS COVERED
□
This product is covered under the manufacturer's
1
-Year Limited
Warranty against defects in materials and workmanship. If your furniture
frame fails structurally due to inferior metals or welds during normal use
within two years of purchase, the manufacturer
will
repair or replace the
defective piece. Resin weave and cushions are warranted for 1
-Year
from date of purchase. Peeling, crackling, blistering, discoloration or
fading are also warranted for 1-Year from the date of purchase.
Warranty is to the original purchaser and is non-transferable. Proof of
purchase (dated register receipt) and in some cases, photos of product
are
required for warranty claims. Lack of original receipt will void the
warranty. We reserve the right to make substitutions with
similar
merchandise, if the model in question is no longer in production.
Warranty
