![background image](http://html1.mh-extra.com/html/abbott/sotoxa-tox400p/sotoxa-tox400p_user-manual_3336972028.webp)
SOTOX A™ MOBILE ANALY ZER | USER GUIDE
27 | EN
8. M AIN MENU
8.5
Installed questions
To view which questions are installed on the analyzer and will be available at the end of a subject test, from the main menu select
Installed Questions.
8.6
Exporting diagnostic data
Diagnostic data can be exported from the SoToxa™ Mobile Analyzer to an SD card, if required and instructed to by Customer Service on
behalf of the manufacturer. This data can be used to aid with troubleshooting of a particular issue or as part of routine monitoring of how
the system is working.
To export the diagnostic data to an SD card, follow these steps.
Step 1: Insert the SD card into the analyzer before starting this procedure.
Step 2: From the main menu, select the Export Diagnostics option.
Step 3: A progress wheel will be displayed while the data is being exported. It may take several minutes to complete as it is dependent on the number
of tests completed on the analyzer.
Step 4: On completion of the export the main menu will be displayed.
Step 5: Turn the analyzer off and remove the SD card from the slot and return to Customer Service as instructed.
Step 6: Re-screw the card cover into place.
Please note that if the battery is too low, then the warning message shown below will appear when you start to export the data. Either charge
the analyzer or simply connect to the mains before starting the export again.
Step 2
Step 3