![background image](http://html1.mh-extra.com/html/abbott/heartmate-touch/heartmate-touch_quick-start-manual_3348353012.webp)
7
Quick Start
Set Up and Connect
1. Verify the Power Module is set up and powered on.
2. Insert the
HeartMate Touch™
Wireless Adapter into the socket located on the side of the Power
Module. The
HeartMate Touch
Wireless Adapter light displays a white light for 1 second upon
connection.
3. To turn on the Tablet, press and hold the top button until the logo appears.
IMPORTANT!
Keep the Wi-Fi‡ and software automatic updates turned off in the Tablet for use with
the HeartMate Touch app. Follow Abbott’s instructions regarding when to connect to Wi-Fi‡ and the
process for maintaining approved software. Installing iOS‡ updates without Abbott notification may
impact product use. If you have any questions, contact your local Abbott representative at any time.
Note:
Before launching the HeartMate Touch App, setup the Tablet (in Settings) for the specific
region, time zone, the language and time format that the Tablet is going to be used. Date and time
display may vary and is dependent on your Settings and HeartMate Touch App language selected.
Date and time displayed in the header (
) may also vary and is dependent on your Settings.
Header format and content is subject to change.
Figure 3 Header
4. Tap
to launch the HeartMate Touch™ App.
CAUTION !
The Tablet for use with the HeartMate Touch
™
App should have its AC power adapter connected
to an AC electrical power outlet during the surgical procedure.