3-1
Questions? Refer to Page 11-22 For Technical Support Instructions.
Patient Test
This chapter describes the steps to be taken to test patient blood glucose or ketone levels in fresh whole blood using the FreeStyle
Precision Pro system. Inside each box of test strips is a package insert with detailed instructions for use.
Operating Guidelines for All Samples
Please follow the recommended guidelines for the most accurate results:
• Always wear gloves and follow your facility’s biohazard safety policies and procedures when performing tests involving
patient blood samples.
• Make sure that the meter and test strips are at room temperature. If the meter is moved to an area that is warmer or cooler
than where it was before, allow the meter to reach the new room temperature before testing.
• Use only control solutions specified in the test strip instructions for use to verify the performance of the FreeStyle Precision
Pro meter.
• Use FreeStyle Precision Pro and Precision Xceed Pro Test Strips with the FreeStyle Precision Pro meter.
• Refer to the test strip package insert for specific directions on storage and use of the test strips.
• Do not use the test strips beyond the expiry date printed on the barcode label and outer box.
• Do not use the test strip if the foil packet has a puncture or tear.
• Do not use test strips that are wet, bent, scratched or damaged. Use the test strip immediately after opening its foil packet.
Chapter 3: Patient Test
Summary of Contents for FreeStyle Precision Pro
