XXXXXXXXXXX
YYYY-MM-DD
XXX
CODE
CODE
Abb
ott D
iabe
tes C
are In
c. 1360
South Loop Road, Alameda, C
A 94
502
A
RT3
65
04
Re
v.
1 0
8/
15
XXXXXXXXXXX
XXX
YYYY-MM-DD
STEP 3
STEP 6
STEP 9
G
et Ready
A
pply S
ensor
P
repar
e S
ensor A
pplic
at
or
Clean site with alcohol wipe. Allow
site to dry before proceeding.
Peel lid completely off Sensor Pack.
Unscrew cap from Sensor Applicator.
CAUTION:
Sensor codes must
match on Sensor Pack and
Sensor Applicator or glucose
readings will be incorrect.
Select site on back of upper arm.
Do not use other sites as these are
not approved and may result in
inaccurate glucose readings.
Note:
Avoid scars, moles, stretch
marks, lumps, and insulin injection
sites. To prevent skin irritation,
rotate sites between applications.
Refer to your User’s Manual for full system instructions and information.
Touchscreen
Home Button
USB Port
Sensor
Pack
Reader
Place Sensor Applicator over site
and push down firmly to apply
Sensor.
CAUTION:
Do not push down on
Sensor Applicator until placed
over prepared site to prevent
unintended results or injury.
Make sure Sensor is secure.
Discard used Sensor Applicator
and Sensor Pack according to
local regulations.
Gently pull Sensor Applicator
away from your body.
STEP 1
STEP 4
STEP 7
STEP 2
STEP 5
STEP 8
Line up dark mark on Sensor
Applicator with dark mark
on Sensor Pack. On a hard
surface, press down firmly
on Sensor Applicator until it
comes to a stop.
Sensor Applicator is ready to
apply Sensor.
CAUTION:
Sensor Applicator
now contains a needle. Do not
touch inside Sensor Applicator
or put it back into Sensor Pack.
Lift Sensor Applicator out of
Sensor Pack.
Lid
Cap
Sensor
Sensor
Applicator
Codes on labels
must match
●
1
Assemble and Apply Sensor
to the back of your upper arm
●
2
Start new Sensor with Reader
Wait 60 minutes
for start-up
You can check your glucose whenever
you want for up to 14 days
FLASH GLUCOSE MONITORING SYSTEM
Quick Start Guide for
FreeStyle Libre 14 day Reader
Setup Overview
●
1
Assemble and Apply Sensor to the back of your upper arm
