CELL-DYN
®
3200 System Operator’s Manual
5-133
9140181H—October 2001
Section 5
Operating Instructions
Figure 5.50 Customize Display for Data Log Screen Showing Group 1 Customized
Select Parameter
The
[SELECT PARAMETER]
key is used to select a parameter designated by the
cursor. When the key is pressed, the selected parameter is highlighted, the label
changes to
[PLACE PARAMETER]
, and a
[CANCEL SELECTION]
key is displayed.
Place Parameter
The
[PLACE PARAMETER]
key is used to display the parameter in the location
indicated by the position of the cursor.
Cancel Selection
The
[CANCEL SELECTION]
key is used to cancel the selection and display the
[SELECT PARAMETER]
key.