Abbott Aviator User Manual Download Page 35

Page: 35 / 75

Steps

Do This

Decide what to do

next.

If you want to

Then do this

Finish priming the

cannula

Allow pump to complete delivering prime.

Note:

You will hear two more beeps when prime is finished.

Go to the next step.

STOP priming the

cannula

Notice

Stop is highlighted

Press

Enter button.

Go to the next step.

Decide whether to

start daily basal now,

or wait till later.

Note:

If you inserted a new reservoir and went directly to prime cannula, make sure

the amount is enough to engage the reservoir and insulin emerges from the end of

the connector needle, or else the pump will return to the

Home

screen instead of

prompting you to start basal delivery. Also

make

sure there are NO bubbles in the

tubing

Notice the CONFIRM screen and “Start Daily Basal?” message displays

immediately after cannula priming is complete.

If you want to

Then do this

Start your daily

basal NOW

Scroll to highlight

Yes.

Press

Enter button to return to the Home screen.

Note:

You will hear 4 beeps and the pump will vibrate twice.

Go to Step 10 to check your work.

Start your daily

basal LATER

Notice

No is highlighted.

Press

Enter button.

Note:

The pump screen will return to the

Home

screen.

Review the

Basal panel

on the Home screen showing

that Daily basal has NOT started.
Check with your healthcare professional to decide when

you should start your daily basal.

Steps

Do This

Check your work.

10.

Check that your Daily basal is started in the Basal panel on the Home screen. The

name of the active basal program and the units will display in the Basal panel.

Note:

If you started your daily basal here from your pump, there is

need to also

start basal delivery from the companion.

WARNING:

Check blood glucose 2-3 hours after inserting a new infusion set to make

sure your

blood glucose level

is normal.

Section 2: Prime Pump and Infusion Set

2.4 Fill Reservoir

Section 3: Using Your System – The Basics

3.1.1 Start Basal Delivery

DOC15736_Rev-A-Man.indd 49-50

2/9/09 11:29:38 AM

Summary of Contents for Aviator












































































Search results

Summary of Contents for Aviator

Reviews:

Related manuals for Aviator

Brands by name

Popular brands

Abbott Aviator, User Manual

Search results

Summary of Contents for Aviator

Reviews:

Related manuals for Aviator

Brands by name

Popular brands