ATBG600/8 Bench Grinder
5
b)
Do not use the power tool if the switch does not turn it on and off.
Any power
tool
that cannot be controlled with the switch is dangerous and must be repaired.
c)
Disconnect the plug from the power source before making any adjustments, chang-
ing accessories, or storing power tools.
Such preventive safety measures reduce the
risk of starting the power
tool
accidentally.
d)
Store idle power tools out of the reach of children and do not allow persons unfa-
miliar with the power tool or these instructions to operate the power tool.
Power
tools
are dangerous in the hands of untrained users.
e)
Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tools operation. If dam-
aged, have the power tool repaired before use.
Many accidents are caused by poorly
maintained power
tools
.
f)
Keep cutting tools sharp and clean.
Properly maintained cutting
tools
with sharp cutting
edges are less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc., in accordance with these instruc-
tions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work to be performed.
Use of the power
tool
for operations different from intended could result in a hazardous situation.
5) Service
a)
Have your power tool serviced by a qualified repair person using only identical re-
placement parts.
This will ensure that the safety of the power
tool
is maintained.
ADDITIONAL SAFETY RULES FOR BENCH GRINDERS
•
Ensure that power tools are disconnected from the mains supply when not in use, before
servicing, lubricating or making adjustments and when changing accessories such as
grinding wheels.
•
Always use the correct type of grinding wheel for the type of operation to be carried out and
the material being machined. Do not use a grinding wheel as a cutting disc.
•
Only use grinding wheels that are in good condition. This will improve grinding and reduce
the load on the machine ensuring a longer life of the grinding wheel and the machine.
•
Never use damaged grinding wheels. Grinding wheels that are cracked, chipped or worn
could shatter causing injury to the operator and bystanders and damage to the machine.
