Do not instal within 10 feet of a pool, spa or fountain
Fixture(s) should be used
"ONLY"
with
low voltage landscape power units
that do not exceed 25A, 15V.
The main cable from power units
should be buried for less than 6 inches
under the ground level.
1. Please ensure the light cable wires
input are 12v ac/dc.
2. Turn off power before installation.
3. Attach the fixture(s) wires to the
main cable connector suitable for
direct burial and use waterproof wire
nuts.
WN12
(Sold separately).
4. Excavate a hole in the ground,
ensuring that there is a clearance of
approximately 3 inches on all sides to
allow for the placement of gravel.
5. Turn on the power.
Main line
WN12
(Sold separately)
Main line
WN12
(Sold separately)
CAUTION:
fixture(s) must be installed in accordance with all local codes and ordinances.
INSTALLATION INSTRUCTION
www.ABBALightingUSA.com
3" Gravel
3" Gravel
Both sides
Below
Concrete
3" Gravel
3" Gravel
Both sides
Soil
INSTALLATION ON CONCRETE
INSTALLATION ON SOIL
DIAMETER: 4.90”
1.42”
4.
60
”
