Do not instal within 10 feet of a pool, spa or fountain
CAUTION:
Fixture(s) must be installed in accordance with all local codes and ordinances.
INSTALLATION INSTRUCTION
To ensure optimal performance and safety, it is
important to use our fixtures ONLY with a low voltage
landscape transformer. This transformer reduces the
voltage from 120V to 12V, making it safe and suitable
for outdoor use.
When installing the fixture(s), please follow these
instructions carefully:
1.Prior to installation, it is imperative to verify that
the power is deactivated to guarantee your safety.
2.Remove the metal plate using Allen wrench then
securely attach the screw to the ground spike using
the accompanying metal plate.
3. Secure the screws, making sure the metal plate is
connected to the spike onto to the fixture.
4. To establish a dependable and enduring electrical
connection between fixture wires and the main line in
outdoor or underground installations, it is essential
to select a suitable main cable connector designed
for direct burial. This connector should be chosen
based on its ability to withstand environmental
conditions, resist moisture and corrosion, and
provide robust insulation. By adhering to industry
standards and best practices, including proper wire
stripping and secure fastening techniques, a reliable
connection can be established, ensuring optimal
performance, safety, and longevity of the system.
We recommend using
WN12
waterproof wire nuts
(sold separately) for optimal connectivity.
5. Strip the insulation: Carefully strip approximately
3/4 inch (1.9 cm) of insulation from the ends of the
two wires you wish to connect. Ensure that the bare
metal ends are clean and free from any frayed
strands.
6. Align the wires: Hold the stripped ends of the two
wires together, aligning them neatly and ensuring
that no stray strands are crossing over.
www.ABBALightingUSA.com
