—
Using Ekip Programming and Ekip Connect
(Optional, laptop and Ekip Programming module
required)
Ekip connect is not required because all programming can be done from the HMI. It is, however a
valuable tool for offline programming or rapidly programming multiple ATS with the same program.
Lamp
test
l
ON
Off
load
test
ll
ON
Auto
Alarm reset
On
load
test
Bypass
time
delay
Dropout ∆U / ∆f
Manual
retransfer
Generator
stop delay
4 min
30 s
∆U 5% / ∆f 5%
∆U 10% / ∆f 5%
∆U 15% / ∆f 10%
∆U 20% / ∆f 10%
0
1
2
3
4
5
10
15
20
30
S1 Failure
delay [s]
S1 Return
delay [min]
On
Off
Auto
config
Start
Ok
Priority
No priority
Source 1
In-phase
monitor
Off
On
AUTO
!
S1
S2
LOAD
l
ll
With Ekip Programming module and a laptop with Ekip Connect
software, you can view status, set operational parameters, and
configure generator exercisers on the ATS, even without any line
voltage or auxiliary power connected to the panel. This USB
module plugs directly to the HMI. Download the Ekip Connect
software and manual from the QR code or web address at the right.
https://library.abb.com/en/
Programming with Ekip Connect
Programming port
Ekip
programming
module
(ZEAEKPPGM)
Figure 2
