21
¥
Packet Protocol.
The Totalflow Packet protocol is selected for
the port assigned to this annunciator.
R
LevelMaster Protocol
: The LevelMaster protocol is selected
for the port assigned to this annunciator.
Measurement Applications
B
F
Back Flow Condition
: Visible only when the DP variable is
being displayed.
Z
Zero Flow Condition
: Visible only when the Flow Rate
variable is being displayed
.
H
Hold:
Displayed when PCCU32 is in
Calibration Mode
and
has a measurement application in
Hold
mode.
A
Alarm Condition.
Need to view alarm. You may need to
compare application limits to current values to determine
where the alarm condition is present.
A
D
A to D Failure.
Displayed if A to D Converter’s Differential
Pressure, Absolute Static Pressure or temperature readings
exceed maximum counts or are less than minimum counts.
Display Application
1
A number represents the Display Group number currently
being displayed.
↑
The displayed item’s value is above the
Data High Limit
value
specified on the display
Item Setup
screen.
↓
The displayed item’s value is below the
Data Low Limit
value
specified on the display
Item Setup
screen.
Summary of Contents for XFC6200EX
Page 1: ...X MADE IN U S A X X ...
Page 23: ...23 NOTES ...
