Commissioning
System Manual 2CKA000073B9795
│47
Setting of the IP address according to the example of Windows 10 operating system.
Use the following steps to set the IP address:
1. Switch to the system controller.
2. Open: The network and the enabling centre [1].
3. Open: Connections [2].
– Dialogue field "Connections" is displayed.
4. Open in dialogue field: Characteristics [3].
5. Mark in dialogue field: "Internet protocol Version 4 (TCP/IPv4)" [4].
6. Open in dialogue field: Characteristics [5].
7. Activate in dialogue field: Use the following IP address [6].
8. Enter the correct IP address at "IP address" (example: 120.168.0.100) [7].
9. At "Subnet mask": Only enter a click [8].
– The address is located automatically.
10. Confirm and close all windows.
The device can now be called up via Web browser.
