10
A. Permanent override:
Insert the key into the switch.
After 10 seconds the program contained in the key will be executed without
clearing the program contained in the time switch.
As soon as the key is removed the program of the time switch is again valid.
B. Copy (load) / Save (save):
The key makes it possible to save a program contained in the time switch.
It is also possible to copy the contents (p settings
Astro
) of the key
into the clock.
1. Insert the key and wait for 2 sec.
2. Using
menu
, select the mode:
save :
to save a program contained in the time switch,
load :
to load the program of the key into the time switch,
:
to check the program contained in the key.
3. Validate the selection with
enter
.
4. For
save
and
load
reconfirm with
enter
.
The following error messages may appear on the screen:
no prog :
the key is empty, it does not contain any program.
Error
:
incompatible key type.
In these two cases:
Only the
save
mode is possible.
The error message remains on display as long as the key is present, but
in this case the program of the time switch is executed.
Override - waivers
TWA-1 :
by pressing repeatedly on
-
for channel
C1
TWA-2 :
by pressing repeatedly on
-
for channel
C1
and on
+
for
channel
C2
.
If the state of the output is
On:
1
st
pressure: temporary waiver.
Off
and
flash. The next program step
will let you return to the automatic mode.
2
nd
pressure: permanent override.
On
and
are permanent.
This overridemust be cancelled manually.
3
rd
pressure: temporary override 15 minutes.
On
, and
15
are permanent.
The return to automatic mode will take place after 15 min.
