background image

Assembly Instructions / TPX44-H

1  Introduction / 1.4  Definition of warning, caution, note

© Copyright 2019 ABB. All rights reserved.

HZTL455311P0037_EN

Rev.A

November 2019

ABB Turbo Systems

ABB Turbo Systems Ltd is identified as ABB Turbo Systems in this document.

Official service stations of ABB Turbo Systems

Official service stations are identified in this document as ABB Turbocharging Service Sta-
tions. They are regularly audited and certified by ABB Turbo Systems. See "Contact Informa-
tion" on our website at www.abb.com/turbocharging.

1.4

Definition of warning, caution, note

 WARNING

Definition of Warning

Non-compliance or inaccurate compliance with working or operating in-
structions indicated by this symbol and the word 

WARNING

 can lead to seri-

ous injuries to personnel and even to fatal accidents.

u

Warning signs must always be observed.

 CAUTION

Definition of Caution

Non-compliance or inaccurate compliance with working or operating in-
structions indicated by this symbol and the word 

CAUTION

 can lead to seri-

ous damage to engine or property with grave consequences.

u

Caution signs must always be observed

.

NOTICE

Note

The note provides advice which facilitates the work.

Page 

3

 / 

17

Summary of Contents for TPX Series





















Reviews: