Operation Manual / TPS50
8 Disassembly and assembly / 8.3 Disassembling and assembling tur-
bochargers
© Copyright 2021 . All rights reserved.
HZTL2401_EN
Rev.A
September 2021
NOTICE
An optimal setting of the V-clamp is achieved by lightly striking the
cover clamp with a plastic tip hammer.
u
Fit bearing casing (42001) using the fixing screws (C).
u
Tighten the fixing screws to the tightening torques specified in the
following table.
TPS
Fixing screws C [mm]
Tightening torques
[Nm]
50
M 16
230
Lifting turbine casing
u
Fasten lifting gear to assembly-disassembly device (90020) and
clamp tightly to compressor casing (51000) (tightening torque 60
Nm).
Page
54
/
71
