ABB Terra AC User Manual Download Page 35 | Manualshive

Page: 35 / 54

ABB Terra AC User Manual Download Page 35

4.4

Start a charge session

4.4.1

EVSE with an EV charge cable

Caution: During the charge session, do not disconnect the EV charge

cable from the connection on the EV. There is a risk of damage of the

connector of the EV.

Note: The LEDs show the status of the charge session.

1. Take the EV charge cable from the enclosure.

2. Use your RFID card or

ChargerSyncapp to authorize the use of the EVSE.

The authorization of the connection to the EV starts.

3. Connect the EV charge cable to connector of the EV.

The EVSE charges the EV.

4.4.2

EVSE with a socket

Caution: During the charge session, do not disconnect the EV charge

cable. There is a risk of damage of the socket of the EVSE or the

connector of the EV.

Note: The LEDs show the status of the charge session.

1. Connect your EV charge cable to the connection on your EV.

2. Use your RFID card or

ChargerSync app to authorize for use of the EVSE.

The authorization of the connection to the EV starts.

3. Connect the EV charge cable to the socket of the EVSE.

The EVSE charges the EV.

4.5

Wake up the EV when it is unavailable

4.5.1

Wake up the EV (EVSE without display)

Preliminary requirements

1.

The

ChargerSync app shows 'waiting for EV'.

Procedure

1. Disconnect the EV charge cable from the EV.

2. Connect the EV charge cable to the EV again.

Operation

BCM.V3Y00.0-EN | 002

35

«
...
33
34
35
36
37
...
»

Summary of Contents for Terra AC























































Reviews:

No comments