ABB Terra AC 40 A, User Manual

Page: 21 / 31

21
Stop a charge session
Note:
If you disconnect the EV charge cable
during the charge session, the Terra AC
automatically disconnects the power
supply. This stops all charging operations.
Wake up the EV when unavailable - Terra AC non display
Wake up the EV when unavailable - Terra AC with display
Start a charge session
Caution:
During the charge session, do not
disconnect the EV charge cable from the
connection on the EV. There is a risk of
damage of the connector of the EV.
Note:
The LEDs show the status of the charge
session.
1. Take the EV charge cable from the enclosure.
2. Use your RFID card or ChargerSyncapp to authorize the
use of the Terra AC. The authorization of the connection
to the EV starts.
3. Connect the EV charge cable to connector of the EV. The
Terra AC charges the EV.
Procedure
1. Disconnect the EV charge cable from the EV.
2. Connect the EV charge cable to the EV again.
Procedure
1. Disconnect the EV charge cable from the EV.
2. Connect the EV charge cable to the EV again.
Wrap the EV charge cable around the enclosure
1. Select one of the two ways to end the charge session.
• Wait until the charge session is completed
- The ChargerSync app shows that the charge session is
completed
- The charging LED is on
- If your Terra AC has a display, the display shows that the
charge session is completed
When the charge session is completed, the Terra AC
disconnects the power supply automatically.
• Authorize the ending of the use of the Terra AC with your
RFID card or the ChargerSync app. The authorization of
the disconnection to the EV starts
2. Disconnect the EV charge cable from the EV.
3. Wrap the EV charge cable around the enclosure.
≔
TA B L E O F CO N T EN T S
←
P R E V I O US C H A P T ER
→
N E X T C H A P T ER