Note: When the EVSE is put in a corrosion sensitive environment, superficial
rust is possible on welding points. This rust is only visual. There is no risk for
the integrity of the cabinet. The procedure below removes the rust.
Procedure
1. Rinse with low-pressure tap water to remove rough dirt.
2. Apply a a solution of cleaning agent to the cabinet and let it soak.
3. Manually remove dirt. Use the non-abrasive tool.
Caution: Do not use abrasive tools.
4. Rinse with low-pressure tap water.
5. If necessary, apply wax on the front for extra protection and gloss.
6. If there was rust and you want it not to appear again, apply a rust-preventive primer.
Ask the manufacturer for specifications and instructions.
4.8.3
Do a check on the cabinet
1. Do a check for damage on these parts:
Part
Damage
EV charge cables and connectors
Cracks or ruptures
Internal wires of the cable are visible
Touchscreen
Cracks
Touch screen does not work
Coating of the cabinet
Cracks or ruptures
Cabinet
Signs of rust that cause ingress of water
2. If you see damage, contact the manufacturer. Refer to section
4.8.4
Replace the air inlet filter
Preliminary requirements
•
Spanner
•
Air inlet filters. Refer to
.
Operation
BCM.S1101.0-EN | 001
27
