ABB TCC300, Quick Start Manual

Page: 1 / 12

Quick Start Guide
TCC300 Tapchanger Control
1 LCD SCREEN Pressing any push button will wake up the LCD and display the heading corresponding to the “Hot Button” label
inside the push button - WAKE, MNTR, SETP, CNFG, COMM, UTIL, or VR.
2 EXIT/WAKE
Push button The EXIT WAKE Push button wakes the LCD from sleep mode and begins scrolling through a list of user pro-
grammed metered/calculated values.
3 VR Pushbutton Activates the user defined Voltage Reduction Steps
Shortcuts/arrows
4 SETP
Access to the Setpoints screens
5 MNTR Access to the Monitoring screens
6 ENT/UTL Push button Access to the Utilities screens and enter button
7 CNFG Access to the Configuration screens
8 COMM Access to the Communication screens
9 LEDS See page 2
10 USB Port Out of Band High Voltage
11 Smart FlashCard Slot Used for loading and saving setpoints, DNP files and IEC 61850 CID files, saving datalog, SOE and OSC files, clone
saving and uploading, updating firmware, saving Wakeup screen parameters and all metering parameters, and can
be used as an Access Code Key.
1
6
9
3
8
2
4
5
7
10
11