background image

4

ST-E EARTHING SWITCH 

I N S T R U C T I O N   M A N U A L

Safety always comes first

That's why our instruction manual begins with 
these recommendations.

•  

Only install switchgear in enclosed rooms 

suitable for electrical equipment

•  Ensure that installation, operation and 

maintenance are  carried out by specialist 
electricians only

•  

Fully comply with the legally recognized 

standards,

 the connection conditions of the 

local electrical utility and the relevant safety 
at work regulations

•  

Observe the relevant information in the 

instruction manual for all actions involving 
switchgear 

Danger!

•  

Pay special attention to the hazard notes in the 

instruction manual marked with this warning 
symbol

•  Make sure that the specified criteria are not 

exceeded under switchgear operation and 
maintenance

•  Ensure the instruction manual is accessible to 

all personnel involved in installation , operation

 

and maintenance

•  

The user’s personnel must act responsibly in 

all matters relating to safety at work and  
correct handling of the switchgear

If you have any further questions on this instruction manual, the 

members of our field organization will be pleased to provide the 
required information.

Summary of Contents for ST-E Series











Reviews: