Setup pages
70
headers right next to the Logout link and on the Login page. It is also included in the
default alarm messages.
The “More information” field can be used to do notes about the installation.
The following configuration properties are available:
SMTP server
– IP-number or domain name to the SMTP server that the module
should use when sending E-mails. If domain name is used make sure that you have
entered a DNS under the Network configuration.
Port number
– The TCP/IP port used by the SMTP server. The default is 25, but
sometimes the server needs to be adjusted to another port because of firewall
limitations.
SMTP Authentication
• Authentication method: disabled, plain, login or cram-MD5
• User name for sending E-mails
• Password for sending E-mails
Sender
– The "From" field in the alarm mail. Example “SREA-01”.
Reply path
– The E-mail address to send a mail to when someone wants to reply to
an alarm mail.
Summary of Contents for SREA-01
