![background image](http://html.mh-extra.com/html/abb/srea-01/srea-01_user-manual_219012.webp)
Introduction
12
contains help on configuring the settings of the SREA-01 platform on
the web pages.
contains help on configuring which drives are connected to
SREA-01 and what should be monitored and logged.
describes how to diagnose problems during installation, commissioning
and normal operation.
Appendix A: Technical specifications
contains technical information on the SREA-01
module.
Appendix B: Internal Modbus registers
contains a list of registers of SREA-01 that
can be accessed by Modbus/TCP clients.
Appendix C: Creating custom device templates for unsupported devices
contains
help on creating a custom template file so that the basic functionality of SREA-01
can be used even with unsupported ABB drives.
Terms used in this manual
Actual value
An actual value is a piece of state information of the drive. Usually the actual values
are read-only and can be accessed in parameter groups 1…9.
Alarm
Alarms are abnormal occasions that SREA-01 monitors for. If an alarm event
happens, SREA-01 can send an alarm message. Please note that with some drives,
namely ACS350 and ACS/ACH550, the term alarm is also used to describe a minor,
non-fatal fault or other abnormal condition. With other drives, however, these
situations are called warnings.
Binding
Bindings are a method of copying data from one drive to another. For example, if a
binding connects the parameters 12.02 of drive A and the parameter 12.02 of drive
B, then the value of the first drive is copied to the second drive with a specified
interval.
Cross-over Ethernet cable
A cross-over Ethernet cable is a special RJ45-ended cable that can be used to
connect exactly two Ethernet devices together without using a hub or a switch. They
are useful in many simple installations and when configuring a device without
interfering with other network equipment.
Device
With SREA-01, the term device is used to refer to a device that is connected to
SREA-01, i.e. the drive.
DHCP
DHCP stands for Dynamic Host Configuration Protocol. It is used in networks to
configure the IP address and other network settings of a connecting device
Summary of Contents for SREA-01
