Configuration pages
77
Configuration pages
Overview
The Configuration pages are used to describe which drives are connected and how
they should be monitored and logged by SREA-01. The pages are accessed by
selecting Configuration from the main menu and then the feature to configure from
the appearing sub-menu. The Configuration pages can be used to configure
• templates, which are available drive model information files,
• devices, which are connected drives,
• pages, which are customized views of drive parameters and actual values,
• alarms, which are actions that happen when a special event occurs,
• logger, which stores data from drives into a file,
• bindings, which are data relays between drives.
Note:
The user account must have admin privileges to be able to access the
Configuration pages.
Templates
Device templates are drive model information files that contain properties for
available parameters and features in a drive of a certain type and mode. To name
just a few, these properties include parameter names, data scaling, presentation
information, fault codes and alarms.
The Templates page shows a list of available template files. The name of the
template corresponds to the drive model that it is used with. Most templates are
limited to be used only with some specific configuration of the drive. For example,
some templates support only speed presentation in Hz and thus require the drive to
be in Scalar control mode. Others support only speed presentation in rpm and
require the drive to be in Vector or DTC control mode.
Summary of Contents for SREA-01
