3
8) Refit the instrument to the case – see Fig. 3.1.
9) Restore the power supply to the instrument.
1
Check that PCB link LK1
is fitted and is in the
correct position for
Compact Flash hardware.
LK
1
5V Position
SmartMedia
LK
1
3.3V Position
Compact Flash
LK1
LK1
Fig. 3.4 PCB Link LK1 Positions
6) Fit the new media board sub-assembly – see Fig. 3.3.
7) Refit the PCB locking bar and chassis top cover –
see Fig. 3.5.
…3
Fitting Media Board
Sub-Assembly – Figs. 3.1 to 3.5
5) Check the position of PCB link LK1 – see Fig. 3.4.
EMC Contacts
Position top cover as shown
Slide forward
Lower rear
Refit pozidriv screws
(one each side)
Refit PCB locking bar
ensuring the slots
in the bar locate correctly
on the boards and chassis
1
2
3
4
5
5
Caution. When positioning the
chassis top cover, take care not to
damage the EMC contacts.
Fig. 3.5 Refitting the PCB Locking Bar and Chassis Top Cover
