ABB Slimline XRG2/3 Series, Installation Instructions Manual

Page: 14 / 36

12
—
6. Insert the RJ45 network cable into the
slot of the PCB substrate (3)
.
Use another cable tie (4) to tie the
RJ45 network cable to the base
.
4. Install the ITS module into the transparent base. Use cable tie (1) to tie the RJ45 network
cable to the transparent base.
5. Use cable tie (2) to tie the RJ45 network
cable to the middle base, then install the
transparent base.
7. Close the frontcover.
SWITC H D ISCO NNEC TO R FUSE, XRG2/3
1
2
4 3