Safety
42/14-42-EN Sensyflow
FMT700-P
5
Pos: 4.1 /Überschriften/1/S - U/Sicherheit @ 0\mod_1129703894050_3101.doc @ 3168 @ 1
1 Safety
Pos: 4.2 /Sicherheit/Allgemein/Allgemeines und Lesehinweise @ 37\mod_1267528465562_3101.doc @ 325891 @
You must read these instructions carefully prior to installing and commissioning the device.
These instructions are an important part of the product and must be kept for future reference.
These instructions are intended as an overview and do not contain detailed information on all
designs for this product or every possible aspect of installation, operation and maintenance.
For additional information or if specific problems occur that are not discussed in these
instructions, contact the manufacturer.
The content of these instructions is neither part of any previous or existing agreement, promise
or legal relationship nor is it intended to change the same.
This product is built based on state-of-the-art technology and is operationally safe. It has been
tested and left the factory in perfect working order from a safety perspective. The information in
the manual must be observed and followed in order to maintain this state throughout the period
of operation.
Modifications and repairs to the product may only be performed if expressly permitted by these
instructions.
Only by observing all of the safety instructions and all safety/warning symbols in these
instructions can optimum protection of both personnel and the environment, as well as safe and
fault-free operation of the device, be ensured.
Information and symbols directly on the product must be observed. They may not be removed
and must be fully legible at all times.
Pos: 4.3 /Überschriften/1.1/1-spaltig/A - C/Bestimmungsgemäße Verwendung @ 1\mod_1147675805609_3101.doc @ 10755 @ 2
1.1 Intended
use
Pos: 4.4 /Sicherheit/Durchfluss/FMT700-P/Bestimmungsgemäße Verwendung (FMT700-P) @ 34\mod_1255518326656_3101.doc @ 305141 @
Mass flow measurement of air in closed pipelines.
The device is designed for use exclusively within the values stated on the name plate and in the
technical specifications (see the section titled "Specifications").
Pos: 4.5 /Überschriften/1.1/1-spaltig/V - Z/Zielgruppen und Qualifikationen @ 22\mod_1222689902850_3101.doc @ 219227 @ 2
1.2
Target groups and qualifications
Pos: 4.6 /Sicherheit/Durchfluss/FMT700-P/Zielgruppen und Qualifikationen (FMT700-P) @ 34\mod_1255518521703_3101.doc @ 305165 @
Installation, commissioning, and maintenance of the product may only be performed by trained
specialist personnel who have been authorized by the plant operator accordingly. The specialist
personnel must have read and understood the manual and must comply with its instructions.
The operating company must strictly observe the applicable national regulations relating to the
installation, function testing, repair, and maintenance of electrical products.
Pos: 4.7 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 @
