ABB SCC-K, Operator'S Manual

Page: 4 / 24

4 SCC-K NO
2
/ NO Converter Operator’s Manual 42/23-52 EN Rev. 2
General Safety Information
Requirements for
Safe Operation In order to operate in a safe and efficient manner the instrument should be
properly handled and stored, correctly installed and started, properly operated
and correctly maintained.
Personnel
Qualifications Only persons familiar with the installation, set-up, operation and maintenance of
comparable equipment and certified as being capable of such work should work
on the instrument.
Special Information
and Precautions These include
•
The content of this operator’s manual.
•
The safety information affixed to the instrument.
•
The applicable safety precautions for installing and operating electrical devices
•
Safety precautions for working with gases, acids, condensates, etc.
National Regulations The regulations, standards and guidelines cited in this operator’s manual are
applicable in the Federal Republic of Germany. The applicable national regulations
should be followed when the instrument is used in other countries.
Instrument Safety
and Safe Operation The instrument is designed and tested in accordance with EN 61010 Part 1,
“Safety Provisions for Electrical Measuring, Control, Regulation and Laboratory
Instruments” and has been shipped ready for safe operation.
To maintain this condition and to assure safe operation, read and follow the safety
information identified with the
symbol in this manual. Failure to do so can put
persons at risk and can lead to instrument damage as well as damage to other
systems and instruments.
Additional
Information If the information in this operator’s manual does not cover a particular situation,
ABB Automation Service is prepared to supply additional information as needed.
Contact your local ABB Automation service representative or
ABB Automation Service, Post Office Box 93 02 09, D-60457 Frankfurt
Telephone +49-69-79 30-46 00, Fax +49-69-79 30-46 01,
E-mail: callcenter.deapr@de.abb.com