IEC18000662 V1 EN-US
Figure 14: PCM600: Communication protocol selection wizard
For SAM600, only USB is supported.
5.
Select the available port from the COM Port Selection drop-down list to configure, see
IEC18000673 V1 EN-US
Figure 15: PCM600: Communication port selection wizard
In the offline mode it is not mandatory to select the USB port if not
available at the engineering phase. The selected port will be used later to
write the configuration to the SAM600 system.
6.
Select the available product version from the Version Selection Page, see
.
1MRK 511 433-UEN B
Section 4
Setting up a project
SAM600 Process Bus I/O System
19
Engineering manual
© Copyright 2017 ABB. All rights reserved
