2
Cutti ng Tool
O p e r at in g G ui d e
Copyright
This document and parts thereof must not be reproduced or copied without written permission from ABB, and the
contents thereof must not be imparted to a third party, nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license and may be used, copied, or dis-
closed only in accordance with the terms of such license.
Trademarks
ABB and Relion are registered trademarks of the ABB Group. All other brand or product names mentioned in this document
may be trademarks or registered trademarks of their respective holders.
Warranty
Please inquire about the terms of warranty from your nearest ABB representative.
www.abb.com/service
www.abb.com/mediumvoltage
Disclaimer
The data, examples and diagrams in this manual are included solely for the concept or product description and are
not to be deemed as a statement of guaranteed properties. All persons responsible for applying the equipment ad-
dressed in this manual must satisfy themselves that each intended application is suitable and acceptable, including
that any applicable safety or other operational requirements are complied with. In particular, any risks in applications
where a system failure and/or product failure would create a risk for harm to property or persons (including but not
limited to personal injuries or death) shall be the sole responsibility of the person or entity applying the equipment,
and those so responsible are hereby requested to ensure that all measures are taken to exclude or mitigate such
risks.
This product has been designed to be connected and communicate data and information via a network interface
which should be connected to a secure network. It is the sole responsibility of the person or entity responsible for
network administration to ensure a secure connection to the network and to take the necessary measures (such as,
but not limited to, installation of firewalls, application of authentication measures, encryption of data, installation of
anti virus programs, etc.) to protect the product and the network, its system and interface included, against any
kind of security breaches, unauthorized access, interference, intrusion, leakage and/or theft of data or information.
ABB is not liable for any such damages and/or losses.
This document has been carefully checked by ABB but deviations cannot be completely ruled out. In case any errors
are detected, the reader is kindly requested to notify the manufacturer. Other than under explicit contractual com-
mitments, in no event shall ABB be responsible or liable for any loss or damage resulting from the use
of this manual or the application of the equipment.
Conformity
This product complies with the directive of the Council of the European Communities on the approximation of the
laws of the Member States relating to electromagnetic compatibility (EMC Directive 2014/30/EU) and concerning
electrical equipment for use within specified voltage limits (Low-voltage directive 2014/35/EU). This conformity is
the result of tests conducted by ABB in accordance with the product standards of the IEC 60255 series.
