Column name
Description
Values
The value range of the original IEC 61850 data. Scaling is needed to convert
floating point data into DNP3 integer values.
S
Scaling type selected as default. Default “R” means ratio scaling. See the DNP
communication protocol manual for details.
Arg 1, 2, 3, 4
Scaling argument values as default. When ratio scaling is selected, the four
values correspond to min value in, max value in, min value out, and max value
out. See the DNP communication protocol manual for details.
2.5.1
System functions
2.5.1.1
CTRL.LLN0 Local remote station off
Table 88:
CTRL.LLN0 Local remote station off
IEC 61850 name
SA name
Description
Values
S Arg 1,2,3,4
CTRL.LLN0
.LocRem.stVal
-
Off=0; Loc=1; Rem=2;
Station=3
0…3
R
0,3,0,3
2.5.1.2
LD0.LPHD1 System values
Table 89:
LD0.LPHD1 System values
IEC 61850 name
SA name
Description
Values
S Arg 1,2,3,4
LD0.LPHD1
.NumCmpChg.stVal
-
Num.of comp. changes
0…65535
R
0,65535,0,65535
.NumPwrUp.stVal
-
Num.of power ups
0…65535
R
0,65535,0,65535
.PhyHealth1.stVal
Warning
Warning code
0…65535
R
0,65535,0,65535
.PhyHealth2.stVal
Internal Fault
Internal fault code
0…65535
R
0,65535,0,65535
.WacTrg.stVal
-
Num.of watchdog resets
0…65535
R
0,65535,0,65535
.WrmStr.stVal
-
Num.of warm starts
0…65535
R
0,65535,0,65535
2.5.1.3
LD0.DNPGGIO1 Active parameter setting group
Table 90:
LD0.DNPGGIO1 Active parameter setting group
IEC 61850 name
SA name
Description
Values
S Arg 1,2,3,4
LD0.DNPGGIO1
.ActSG.stVal
-
Active setting group
1…6
R
1,6,1,6
1MRS757056 C
Section 2
DNP3 data mappings
REU615
39
Point List Manual