33
Switchgroups
The relay contains the following switchgroups:
SGF1
Output contacts
SGF2
Display settings
SGF3, SGF4
Protection functions
SGF5
Latching feature for programmable LEDs
SGB1...SGB5
Digital inputs (DI1...DI5)
SGR1...SGR8
Output contacts (PO1, PO2, PO3, SO1, SO2, SO3, SO4, SO5)
SGL1...SGL8
Programmable LEDs
To set functions via switchgroups:
1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select the main menu group
SETTINGS
and the wanted
switchgroup menu (for example
SGF
), and press
.
3. Use
or
to select the wanted switchgroup (for example
SGF2
for display
settings) and press
.
4. Use
or
to select setting group 1 or 2 (
GRP1
or
GRP2
). The active setting
group is indicated by an asterisk
“
*
”
.
5. Press
to enter the setting mode and give the password if required.
6. Use
or
to select the bit to be set, and
or
to select the wanted bit
state, see Fig. 4.2.2.2.-4.
7. Press
to confirm the selection. After confirmation, the display returns to the
view mode and shows the checksum of the switchgroup.
8. Press
to return the display to the idle mode.
Voltage Protection Relay
Operator's Manual
REU 610
REU 610
1MRS755770
