ABB RET620 Product Manual Download | Manualshive

Page: 52 / 63

background image

21. Accessories and ordering data

Table 87. Cables

Item

Order number

Cable for optical sensors for arc protection 1.5 m

1MRS120534-1.5

Cable for optical sensors for arc protection 3.0 m

1MRS120534-3.0

Cable for optical sensors for arc protection 5.0 m

1MRS120534-5.0

Table 88. Mounting accessories

Item

Order number

Semi-flush mounting kit

2RCA030573A0001

Wall mounting kit

2RCA030894A0001

19" Mounting panel kit

2RCA031135A0001

22. Tools

The IED is delivered as a pre-configured unit including the
example configuration. The default parameter setting values
can be changed from the front-panel user interface, the Web-
browser based user interface (WebHMI) or the PCM600 tool
in combination with the IED-specific connectivity package.

The Protection and Control IED Manager PCM600 offers
extensive IED configuration functions such as IED signal
configuration, application configuration, graphical display
configuration including single line diagram configuration, and
IEC 61850 communication configuration including horizontal
GOOSE communication.

When the Web-browser based user interface is used, the IED
can be accessed either locally or remotely using a Web
browser (IE 7.0 IE 8.0 or IE 9.0). For security reasons, the

Web-browser based user interface is disabled by default. The
interface can be enabled with the PCM600 tool or from the
front panel user interface. The functionality of the interface
can be limited to read-only access by means of PCM600.

The IED connectivity package is a collection of software and
specific IED information, which enable system products and
tools to connect and interact with the IED. The connectivity
packages reduce the risk of errors in system integration,
minimizing device configuration and set-up times.
Furthermore, the Connectivity Packages for the 620 series
IEDs include a flexible update tool for adding one additional
local HMI language to the IED. The update tool is activated
using PCM600 and it enables multiple updates of the
additional HMI language, thus offering flexible means for
possible future language updates.

Table 89. Tools

Configuration and setting tools

Version

PCM600

2.5 or later

Web-browser based user interface

IE 7.0, IE 8.0 or IE 9.0

RET620 Connectivity Package

2.0

Transformer Protection and Control

1MRS757846 A

RET620

Product version: 2.0

52

ABB

«
...
50
51
52
53
54
...
»

Summary of Contents for RET620
































































Reviews:

No comments

Related manuals for RET620

Brand: PA Pages: 20

Brand: Central Pneumatic Pages: 8

Brand: Raptor Series Pages: 2

Brand: Dometic Pages: 20

Brand: Torklift Pages: 17

Brand: S&B Filters Pages: 16

Brand: SilverStone Pages: 11

Brand: Sel Pages: 318

Brand: PALSON Pages: 1

plc sw30 - SVGA LCD Projector

Brand: Sanyo Pages: 1

Brand: Sanyo Pages: 40

Brand: Sanyo Pages: 41

Brand: Sanyo Pages: 42

Brand: Sanyo Pages: 42

plc sw30 - SVGA LCD Projector

Brand: Sanyo Pages: 52

Brand: AEM Pages: 6

Brand: VDO Pages: 6

Brand: Performance Tool Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands