manualshive.com logo in svg

ABB RET 54 Series, Technical Reference Manual, General

Share
Download
ABB RET 54 Series Technical Reference Manual, General Download Page 10

10

1MRS755225

Transformer Terminal

Technical Reference Manual, General

RET 54_

3. Introduction

3.1.

General

The RET 54_ transformer terminal is part of the ABB Distribution Automation 
system and extends the functionality and flexibility of the concept further. This is 
possible due to the modern technology applied both in hardware and software 
solutions.

Increased performance is achieved by utilizing the multiprocessor architecture. 
Digital signal processing combined with a powerful CPU and distributed I/O 
handling facilitates parallel operations and improves response times and accuracy. 
The HMI including an LCD display with different views makes the local use of the 
RET 54_ transformer terminal safe and easy. The HMI

1

 instructs the user how to 

proceed.

RET543right

Fig. 3.1.-1

RET 54_ transformer terminal

3.2.

Hardware versions

The family of RET 54_ transformer terminals contains several hardware versions. 
Depending on the number of I/Os available, the product is called RET 541, RET 543 
or RET 545, see the following tables.

1. HMI is referred to as MMI in the terminal and in the Relay Setting Tool

Summary of Contents for RET 54 Series





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands