To mount the lens sensor, drill a hole (Ø 10 mm) in the wall of the space to be
supervised. Fit the lens sensor to the hole and fasten it with a self-tapping M3
screw. Alternatively, the lens sensor can be fastened with a cable tie. To do
this, secure the cable tie to a suitable point of attachment on the cubicle wall
and wrap the cable tie tightly around the sensor. Make sure that the cable tie
lies in the groove of the sensor to prevent it from blocking the light.
A040182
Fig. 4.10.-1
Mounting of the lens sensor
A040183
Fig. 4.10.-2
Dimensions of the lens sensor
30
RE_ 610
Protection Relay
Installation Manual
1MRS752265-MUM
