4.5.
Inclined semi-flush mounting
The inclined semi-flush mounting kit (for order number, refer to
Chapter 6. Accessories) allows you to mount the relay to a 25° angle. The
mounting kit contains:
*
Angled frame
*
Gasket
*
Screws
The gasket is used when an IP 54 degree of protection is required for the front
side. If the gasket is not used, the device fulfills the IP 50 requirements.
25
°
221,25 (5U)
105
127
6
A
B
C
D
E
A051485
Fig. 4.5.-1
Inclined semi-flush mounting
A) M4 x 0.7 screws
B) Plug-in unit
C) Case
D) Angled frame
E) Gasket
22
RE_ 610
Protection Relay
Installation Manual
1MRS752265-MUM
