ABB Relion 670 series, Manual

Page: 318 / 366

DO name DO type DA name FC T Signal Mon/C
md
Description
Watt a_dMV
rangeC.llLim.f CF - PLowLowLim - Low Low limit in % of SBase
rangeC.max.f CF - PMax - Maximum value in % of SBase
rangeC.min.f CF - PMin - Minimum value in % of SBase
subMag.f SV - - - Substituted value
range MX - P_RANGE Mon Active Power range
q MX - P Mon Quality: Active Power magnitude
of deadband value
t MX - P Mon Timestamp: Active Power
magnitude of deadband value
subEna SV - - - Enable substitution
db CF - PDbRepInt - Cycl: Report interval (s), Db: In %
of range, Int Db: In %s
zeroDb CF - PZeroDb - Zero point clamping in 0,001% of
range
ALd v1_dSPS stVal ST - ILEAD Mon Current is leading voltage
q ST - ILEAD Mon Quality: Current is leading voltage
t ST - ILEAD Mon Timestamp: Current is leading
voltage
ALg v1_dSPS stVal ST - ILAG Mon Current is lagging voltage
q ST - ILAG Mon Quality: Current is lagging voltage
t ST - ILAG Mon Timestamp: Current is lagging
voltage
7.9.3 Measurement MMXU
7.9.3.1 Phase current measurement CMMXU
LN type LN prefix LN class Function block name
CMMXU (revision 3) C MMXU CMMXU
Table 229: CMMXU Logical node data
DO name DO type DA name FC T Signal Mon/C
md
Description
Mod a_dINC Oper.ctlVal CO - Mod Cmd Mode parameter for 61850
Oper.origin.orCat CO - Mod Cmd Mode parameter for 61850
Oper.origin.orIdent CO - Mod Cmd Mode parameter for 61850
Oper.ctlNum CO - Mod Cmd Mode parameter for 61850
Oper.T CO - Mod Cmd Mode parameter for 61850
Oper.Test CO - Mod Cmd Mode parameter for 61850
Oper.Check CO - Mod Cmd Mode parameter for 61850
Table continues on next page
Section 7
1MRK 511 349-UEN -
Logical node data model
312 670 series 2.1 IEC
Communication protocol manual