ABB Relion 670 2.0 IEC Series, Installation Manual

Page: 91 / 110

Section 8 Removing, repairing and exchanging
8.1 Product lifecycle
At some point of the product lifecycle, the IED will be upgraded to a next generation
unit. When selecting the original product, already consider the upgrading and
extension possibilities that the specific product offers for its whole lifecycle.
8.2 Checking IED information
The IED information includes detailed information about the device, such as version
and serial number. To find the information navigate through the LHMI menus as
indicated below:
1. Select Main Menu/Diagnostics/IED status .
2. Select a submenu with and .
3. Enter the selected submenu with .
4. Browse the information with and .
The Product identifiers submenu contains product related information including
product type, serial number, order number, production date and SW version.
The Installed HW submenu contains information about the HW modules.
8.3 Removing the IED
Before removing the IED, make sure that auxiliary power is turned off and all wiring
is disconnected.
For upgrade purposes the IED does not need to be removed. Before
removing the IED check with your local ABB office if the IED can be
upgraded.
1MRK514019-UEN A
Section 8
Removing, repairing and exchanging
670 series 2.0 IEC 85
Installation manual