ABB Relion 620 Series, Installation Manual

Page: 14 / 48

Section 1
1MAC303209-MB C
Introduction
6 620 series
Installation Manual
Although warning hazards are related to personal injury, it should be understood that
operation of damaged equipment could, under certain operational conditions, result in
degraded process performance leading to personal injury or death. Therefore, comply fully
with all warning and caution notices.
1.4.2 Manual conventions
Conventions used in IED manuals. A particular convention may not be used in this
manual.
• Abbreviations and acronyms in this manual are spelled out in the glossary. The
glossary also contains definitions of important terms.
• Push button navigation in the LHMI menu structure is presented by using the push
button icons, for example:
To navigate between the options, use and .
• HMI menu paths are presented in bold, for example:
Select Main menu > Settings .
• LHMI messages are shown in Courier font, for example:
To save the changes in non-volatile memory, select
Yes
and press .
• Parameter names are shown in italics, for example:
The function can be enabled and disabled with the Operation setting.
• Parameter values are indicated with quotation marks, for example:
The corresponding parameter values are "Enabled" and "Disabled".
• IED input/output messages and monitored data names are shown in Courier font, for
example:
When the function picks up, the
PICKUP
output is set to TRUE.
• Dimensions are provided both in inches and millimeters. Millimeters are used where
the unit for dimension is not specified.
The tip icon indicates advice on, for example, how to design your project
or how to use a certain function.